Does the pressure tank extend the life of the pump Wroten by TDRFORCE Water Pump Factory or Manufacturer
Published on https://tdrpump.com
About the Publisher: TDRFORCE Factory or Manufacturer direct Online Sale Drinking Water Pump, RV Water Pump, Pressure Booster Pump, Sump Pump, Hot Water Pump,Submersible Pump, Liquid Transfer Pump, Garden Pump, Irrigation Pump, Pond Pump, Customized Pump etc
Description: Does the pressure tank extend the life of the pump ? Let's follow the guide from TDRFORCE Pump Factory or Manufacturer.
Does the pressure tank extend the life of the pump? The Pump News From TDRFORCE Water Pump Factroy|Manufacturer?
The pressure tank is separated into two parts by a rubber diaphragm, which is connected to a pipe on one side and is called a water storage chamber.On the other side we have air, which is called a storage chamber.
The air stored in the gas storage chamber assumes the role of regulating the internal pressure. By using the characteristic that the air can be compressed, the air pressure generated by the compression squeezes the intermediate diaphragm, so that the diaphragm squeezes the water storage chamber in reverse, and achieves the role of pressurized drainage.
Let the pump continue to store water in the tank, the internal air is squeezed, the amount of water storage increases, the pressure in the tank also gradually increases, when increased to the stop pressure set by the pump, the pump stops working.
At this time, the faucet opens, gradually discharge the water stored in the tank, the pressure in the tank is gradually reduced, when reduced to the starting pressure set by the pump, the pump starts to work again, to the tank storage water, circulation in turn.
Therefore, the pressure tank can make the pump start when it needs to work, which effectively reduces the number of start and stop times of the pump and prolongs the service life of the pump.Frequent and repeated starts exert pressure on starting and running capacitors.
Frequent and repeated starts can create electrical and mechanical stress on the well pump motor, as it can go from dead stop to full speed in a matter of seconds.Imagine a light bulb being turned on and off repeatedly - it puts pressure on the filament, which shortens the life of the bulb.